It can be used both indoors and outdoors, and between the temperatures of -20°-- 60°.

Its dimensions are: 137.3mm * 73mm* 20.5mm

No. Once the user is finished, it should be disassembled and stored separately.

No, it can be used normally and does not affect the weight balance.

If it affects shooting angle, you can use both the vertical and flashlight modes.

This is normal. There will be a slight restart under fast-moving or long-time loads.

It weighs only 151g.

This product is suitable for Action Cameras:Gopro5, Gopro6, Gopro7, OSMO action, YI Action Camera, YI 4K Action Camera.

Mobile Gimbals:

DJI Mobile3, DJI Mobile2, ZHIYUN Smooth 4, ZHIYUN Smooth Q2, SNOOPPA action, BenbroP1S, MOZA mini-MI, Hohem ISTEAD, VILTA, SIRUI Swift M1

It is built using Aluminum and SUS303.

The action camera with universal interfaces or the ¼-inch screw.

The pole measures 66cm in length with the tripod fully extended and 18cm when stored in your pocket.

The width of phone holder, fully extended, reaches 8.5cm, and the thickness of the mobile phone is recommended to be under 15mm.

It needs to be paired with a universal phone holder when it is used in this way.

1kg.

Wireless connection is available for the Osmo Action and GoPro.

The wireless module is needed for wireless connection to an Osmo Pocket, or you are suggested to use a PGYTECH Type-C to Type-C/Type-C to Lightning data line for wired data connections.

The PGYTECH action camera floating hand grip offers a better handheld experience during underwater photography. Its floating body and wrist-strap attachment keep the camera above the surface of the water and prevent it from sinking. A recognizable red rear cover made from aeronautic aluminum can help you easily find the floating hand grip underwater.

The universal interface can work with GoPro, OSMO Action, OSMO pocket, Xiaoyi, and all other action cameras with a GoPro universal interface.

When using a PGYTECH floating hand grip, you do not need to use the original locking screw. Please use the PGYTECH pin.

Yes. Although the floating hand grip is designed for underwater photography, it is also a good handheld device for any scenario other than underwater shooting, with its superior quality to most related products, as well as its usage-based and customer-oriented design.

Its underwater abilities reaches 60 meters.

No, the floating hand grip utilizes a hollow-sealed design with underwater buoyancy taken into consideration, which prevents the equipment from sinking even if it accidentally slips out of your hands.

It protects the camera from being damaged.

It can work with an Osmo Action, GoPro, Xiaoyi, or other action cameras. The camera size must be less than 88.5mm * 95.5mm * 47.5mm.

8.5cm.

Yes.

Yes.

PGYTECH customers are all across the globe and we have different local warehouses all over the world. We use multiple shipping rules to provide worldwide shipping service. Delivery time varies based on the selected shipping service and destination. 

Free Shipping 

This service is available on all items been in stock in our US FBA warehouse and European FBA warehouse. 

Standard Delivery

This service is available on all items shipped from Chinese warehouse. Standard delivery time ranges from 15 to 25 working days. 

Expedited Express

This service is available on all orders needed to be delivered from Chinese warehouse and offers faster delivery than standard delivery. It usually takes 5-7 working days.

Please note that all delivery dates are estimated only. Orders will be handled and dispatched within 2 business days once the payment is confirmed.

The Arca-Type Quick Release Clamp & Plate V2 serves as an adapter for various photography equipment (cameras, stabilizers, sliders, tripods, Arca-Siwss heads), creating a custom quick-release system for photographers. By combining multiple clamps, it allows quick switching between different gear setups, greatly improving workflow efficiency.

This product comes with a three-year warranty. For more warranty information, please refer to the official website.

The Arca-Type Quick Release Clamp & Plate V2 can compatible with 95% of Arca-Swiss square plates, L-plates, and camera cages. It supports most brands of cameras, stabilizers (though some camera-lens combos may have leveling issues), tripods, Arca heads, and sliders

It can support a maximum load of up to 10kg/22lbs.

56g/1.97oz

Storage dimensions: 68mm*38mm*18mm

The camera connects to the Arca-Type Quick Release Clamp V2 using a standard Arca-Type quick-release plate for fast attachment and detachment.

Yes, the Arca-Type Quick Release Clamp V2 can be used with PGYTECH's action camera SnapLock quick-release plate to mount action cameras.

The Arca-Type Quick Release Clamp V2 is made from high-strength aluminum alloy with CNC one-piece molding.

The packaging includes an S4 hex wrench and a T8 wrench. The S4 hex wrench is used to securely tighten the quick-release plate, while the T8 wrench can adjust the anti-slip stopping pins height.

The anti-slip stopping pins are designed with adjustable height to prevent accidental loss. If it interferes with the installation of the quick-release plate, it can be lowered by turning the pin clockwise until it aligns with the main body.

A1: The Beetle Camera Clip functions as a secure and comfortable way to attach your camera on backpack straps or belts. The beetle enables you to go handsfree, while allowing instant access to your camera by just unlocking the button.

A2: We recommend you to read the product guide with setup and tips.

A3: Up to 75 mm width with a maximum of 15mm thickness and a minimum of 1mm thickness.

A4: The Beetle Camera Clip has a three-year warranty. Find more details by visiting our website: www.pgytech.com/pages/lifetime-warranty

A5: Compatible gear includes DSRL, mirrorless cameras, card machines and action cameras.

A6: The maximum load of the clip is 30kg.

A7: 1.Unlike the traditional knob, we use a clip that you can attach to your strap instantly and very securely. The adjustable buckle enables you to attach your camera to most straps. 

Note: Up to 75 mm width with a maximum of 15mm thickness and a minimum of 1mm thickness

2.The SnapLock plate uses a patented tight-fitting screw containing a thrust needle roller bearing, which ensures the plate doesn't get undone. It mounts the camera very securely.

A8. The weight of the the Beetle Camera Clip is 93g

A9. The Beetle Camera Clip’s dimensions are: 90*41*31mm (it’s pocket size)

A10. Use the hexagon or the slotted wrench to mount your camera onto the 1/4 inch screw, which can be found on the SnapLock plate.

A11. You can use the action camera SnapLock plate to mount the gear on the beetle clip. 

Note: The PGYTECH Action Camera SnapLock Plate is sold separately. 

A12. The main body of it is made from aluminum and PA

A13.The Beetle Camera Clip’s SnapLock Plate is Arca-Swiss compatible. It fits our Action Camera SnapLock Plate perfectly and also works with other Arca-Swiss type tripods.

A14. The Beetle uses the SnapLock quick-release system, which doesn’t work with other camera plates.

A15. The included S4 wrench is for tightening the SnapLock Plate.

The Beetle Camera Clip V2 allows you to securely attach your camera to your belt or backpack strap for hands-free carrying during photography outings. With one-click unlocking, you can quickly access your camera for a seamless shooting experience on the go.

It is compatible with straps within the size range: 1mm ≤ thickness ≤ 20mm, and width ≤ 80mm.

The product comes with a three-year warranty. 

The newly upgraded locking system is compatible with 95% of square Arca-type quick-release plates, supporting most DSLR, mirrorless, compact, and action cameras. When used with the 'PGYTECH Action Camera Quick Release Plate', it can support chest-mounted POV shooting.

The product supports a maximum load of up to 30kg (66 lbs).

The Beetle Camera Clip V2 weighs 79g/2.78oz (excluding the quick-release plate).

88mm*45mm*24mm

The Beetle Camera Clip V2 comes with a PGYTECH Arca-type quick-release plate that attaches to the camera’s base, enabling quick and secure connections.

Yes, by pairing it with the 'PGYTECH Action Camera SnapLock Quick Release Plate', it can support chest-mounted POV shooting.

The main body of the Beetle Camera Clip V2 is made of high-strength aluminum alloy and reinforced plastic.

The PGYTECH Beetle Camera Clip V2 utilizes the SnapLock camera quick-release system, which is compatible with 95% of square Arca-type plates, including those from brands like Peak Design, FALCAM, and more.

The Beetle Camera Clip V2 comes with an S4 hex wrench, which is used to tighten the quick-release plate securely.

The PGYTECH Arca-type quick-release plate features patented anti-loosening screws equipped with flat bearings, ensuring the screw and camera remain stationary during rotation. This prevents loosening, ensuring safe and secure camera attachment.

The cover features a down-filled inner layer. Hand wash and hang dry recommended, with a maximum water temperature of 30°C. Do not bleach, iron, dry clean, or machine wash.

It is compatible with DSLR or mirrorless cameras with lenses up to 150mm. The telephoto edition includes an independent lens sleeve, which can be adapted to lenses with a length of 150-450mm.

The cover itself is not waterproof, but its outer fabric provides level 4 water-repellency.

A 3-year warranty covers functional issues or damage due to manufacturing defects. Surface wear, scratches, misuse, or intentional damage are not included in the warranty.

The cover comes with a storage pouch to hold the cover and lens sleeve. Tighten the drawstring to attach it to your backpack or store it inside.

Our product features an adjustable lens sleeve with dual side drawstrings, allowing flexible extension to fit lenses up to 150mm. Please choose the Telephoto Edition when using a lens with a length of 150 to 450mm.

Yes, it can. The cover features two-way YKK zippers at the bottom, which, when opened, allow for tripod attachment.

It helps maintain your camera’s performance in cold environments, effectively extending battery life and preventing fogging or internal condensation due to temperature shifts between indoors and outdoors. Additionally, it provides warmth for the photographer's hands, making it easier to shoot comfortably for extended periods in harsh winter conditions.

PGYTECH OnePro Flex, OneMo Travel or other brand backpacks with sufficient internal dimensions (please refer to the external dimensions of the insert bag).

XS, S, and M sizes are all equipped with shoulder straps as standard, which can be worn on one shoulder when combined with the horn buckle of the bag body. Except for size L.

The size M insert bag can be flipped over by operating the buckle on the shoulder strap. With the front of the bag facing up, the sides of the bag are pressed against the user's abdomen to achieve balance of the bag, making it easier for users to replace lenses and other equipment without placing the bag and other items on the ground.

L: For regular DSLR and mirrorless cameras: two cameras + eight lenses
M: For regular DSLR and mirrorless cameras: two cameras+four lenses / one camera + five lenses; 
S: For regular DSLR and mirrorless cameras: six lenses / one camera + three lenses; 
XS: For regular DSLR and mirrorless cameras: three lenses / one camera + two lenses; For 70-200mm lens: one camera+one lens

The body of the bag adopts an integral lamination process, and the edges use a steel ring structure. The bag body is not easily deformed and has better protection.

The partition is made of one-piece molding process, which is lightweight, thick and elastic, and can better protect the equipment.

XS  capacity: 5L; weight: 0.23kg; external dimensions: 290mmx120mmx170mm; internal dimensions:  275mm×105mm×160mm
S  capacity: 8L; weight: 0.36kg; external dimensions:290mm*200mm*170mm; internal dimensions: 275mm×185mm×160mm
M  capacity: 12L; weight: 0.47kg; external dimensions: 290mm*280mm*170mm; internal dimensions: 275mm×265mm×160mm
L  capacity: 20L; weight: 0.69kg; external dimensions:290mm*450mm*170mm; internal dimensions: 275mm×435mm×160mm

Not waterproof, splashproof.

Yes, all insert bags can store it. 

It is not recommended to wash it. The product is made of multi-layer fabrics and will be deformed after washing.

We offer a limited lifetime warranty. If you have any problems with product quality, please feel free to contact us at any time.

Basic: 1000cm-1400mm
Artistic: S size: 950-1100mm; L size: 1100mm-1400mm
Vintage: S size: 1000-1200mm; L size: 1200mm-1400mm

Load capacity up to 90kg

PGYTECH patented locking system, the quick connector is made of high-strength plastic material and adopts the principle of dead-point mechanism, which locks the quick bead securely, and there is no risk of loosening at any angle. Combined with multi-layer braided ultra-high molecular weight polyethylene rope, the load capacity can reach 90KG.

The quick bead rope selection of ultra-high molecular weight polyethylene material, from the inside out using red, yellow, black multilayer weaving process made, when the rope reveals the yellow color represents the rope has appeared more obvious wear and tear, please replace the new rope continue to use in a timely manner.

The quick bead rope diameter is currently 1.5mm and can be directly adapted to most brands of camera models, individual models of cameras still need to be adapted through the adapter ring. For example: Fujifilm.

The main part of the strap is made of microfiber, a little dirty place can be wiped with fabric cleaner and put in a cool place to air dry. The product is produced by multi-layer pressing technology, do not directly soak cleaning and machine washing and do not expose to the sun to dry.

Yes, but overly thick gloves can make handling more difficult.

The camera shoulder strap is made of fully water-based microfiber fabric, which is comfortable and breathable, and with the cushioning bump design, it can effectively improve the breathability compared with the traditional strap.

Recommended for compact cameras and mirrorless cameras.

The overall design of the quick beadn is rounded, so it will not scratch your equipment.

If there is a place on the bag where you can secure quick beads, it can be used as a shoulder strap.

We offer a 3-year warranty against manufacturing defects, or faults or breakages that render some or all of our products unusable;

Whereas cosmetic defects, scratches, stains or abrasions, malfunctions or breakages due to misuse, negligence or intentional damage, as well as non-factory functional defects of products (fabrics) not manufactured by us, such as everyday wear and tear of fabric-based materials such as webbing, cords, etc., are not covered by the warranty.

It can be used to temporarily connect the ends of the strap when the camera is off the strap, making it easy to carry.

Basic: 1000cm-1400mm
Artistic: S size: 950-1100mm; L size: 1100mm-1400mm
Vintage: S size: 1000-1200mm; L size: 1200mm-1400mm

Load capacity up to 90kg

PGYTECH patented locking system, the quick connector is made of high-strength plastic material and adopts the principle of dead-point mechanism, which locks the quick bead securely, and there is no risk of loosening at any angle. Combined with multi-layer braided ultra-high molecular weight polyethylene rope, the load capacity can reach 90KG.

The quick bead rope selection of ultra-high molecular weight polyethylene material, from the inside out using red, yellow, black multilayer weaving process made, when the rope reveals the yellow color represents the rope has appeared more obvious wear and tear, please replace the new rope continue to use in a timely manner.

The quick bead rope diameter is currently 1.5mm and can be directly adapted to most brands of camera models, individual models of cameras still need to be adapted through the adapter ring. For example: Fujifilm.

The main part of the strap is made of microfiber, a little dirty place can be wiped with fabric cleaner and put in a cool place to air dry. The product is produced by multi-layer pressing technology, do not directly soak cleaning and machine washing and do not expose to the sun to dry.

Yes, but overly thick gloves can make handling more difficult.

The camera shoulder strap is made of fully water-based microfiber fabric, which is comfortable and breathable, and with the cushioning bump design, it can effectively improve the breathability compared with the traditional strap.

Recommended for compact cameras and mirrorless cameras.

The overall design of the quick beadn is rounded, so it will not scratch your equipment.

If there is a place on the bag where you can secure quick beads, it can be used as a shoulder strap.

We offer a 3-year warranty against manufacturing defects, or faults or breakages that render some or all of our products unusable;

Whereas cosmetic defects, scratches, stains or abrasions, malfunctions or breakages due to misuse, negligence or intentional damage, as well as non-factory functional defects of products (fabrics) not manufactured by us, such as everyday wear and tear of fabric-based materials such as webbing, cords, etc., are not covered by the warranty.

It can be used to temporarily connect the ends of the strap when the camera is off the strap, making it easy to carry.

The PGYTECH Camera Strap Master is made from premium-quality genuine leather and is not recommended for direct washing with water. For surface dirt, please follow the cleaning tips below:
Spot cleaning:
- Water/Oil stains: Gently blot the stain with a clean, absorbent cloth to soak up the liquid. Do not rub forcefully.
- Stubborn stains on smooth leather: Use a leather cleaner (neutral pH), apply with a soft cloth, and clean in circular motions. Do not pour the cleaner directly onto the leather.
- Suede stains: Use a suede-specific eraser or a soft brush. Avoid contact with water.
- Ink stains: Test the edge of the stain with a cotton swab dipped in alcohol. If no discoloration occurs, proceed cautiously. (Note: Alcohol may damage certain leathers, use with care.)

The PGYTECH Camera Strap Master is made from premium-quality genuine leather. Please follow these care tips:
- Do not use wet wipes, soapy water, dishwashing liquids, or other alkaline cleaners.
- Do not apply regular shoe polish or furniture wax (may damage the coating).
- For long-term storage, keep in a dry, well-ventilated area (recommended humidity: 40%RH–60%RH). Use desiccants to prevent mildew.
- Cedar wood blocks or mothballs may be placed near the strap to protect against mold and insects (avoid direct contact with the leather). For mildew spots, gently wipe with a soft cloth dampened in diluted alcohol (1:1 with water).

Adjustable length: 830–1450mm (32.6-57in); suitable for users with heights ranging from 150-190cm (4.9-6.2ft).

Maximum tested load capacity is up to 90kg (198.4lb) under extreme conditions.

There are two D-ring attachment points on the front of the Camera Strap Master. The Expansion Strap can be secured to them, allowing you to carry a camera or binoculars on the chest.

The Chest Strap attaches to both sides of the Master Strap. The length is adjustable to ensure a secure and snug fit.

The Buckle features a dual-anchor design with separate unlock points on both ends.
The side button locks the strap position; the upper front button releases the buckle.

The PGYTECH patented locking system uses a dual-anchor design between the Quick Release Buckle and the Quick Mount Bead for secure attachment. The buckle is made of high-strength plastic and utilizes a dead-point mechanism to firmly lock the bead in place from any angle. The UHMWPE (ultra-high molecular weight polyethylene) woven cord supports up to 90kg (198.4lb).

The Quick Release Plate features PGYTECH's patented anti-loosening design. Please use the included hex key to securely mount it to your camera.

The Quick Mount Bead Cord is made from UHMWPE using a triple-layer weave (red, yellow, black). When the yellow layer becomes visible, it indicates significant wear. Please replace the Quick Mount Bead Cord immediately to ensure continued safety.

The Quick Release Buckle and Quick Mount Bead System uses a dual-anchor design and must be used with the included Quick Release Plate. Do not connect directly to the camera's strap eyelets.

You can operate the quick release system while wearing gloves; however, thick gloves may reduce ease of operation.

The Camera Strap Master is crafted from premium cowhide leather and features 115 ventilation holes that enhance airflow and heat dissipation, effectively reducing heat buildup and ensuring long-lasting comfort.

The Camera Strap Master is recommended for use with mirrorless and DSLR cameras.

The Quick Mount Bead has a smooth, rounded ball-shaped design that prevents scratching your equipment.

We provide a 3-year warranty for manufacturing defects or malfunctions that prevent full or partial use of the product.
However, cosmetic imperfections, scratches, stains, normal wear or wear from misuse, neglect, or intentional damage are not covered. Items not manufactured by PGYTECH, such as fabric components (straps, cords), are also excluded from warranty coverage unless defective upon delivery.

No. The strap is not designed for single-shoulder use.

The chest strap extends up to 360mm (14.17in) in length.

The Camera Strap Master features an asymmetrical design. The widest part of the shoulder area reaches 60mm (2.36in), which effectively distributes weight and reduces fatigue.

The Quick-Release Buckle is made of plastic material that will not cause scratches with light contact. It is recommended to store the camera and strap separately when not in use.

The color fastness of the materials in contact with the body can reach level 4 or above for dry rubbing (friction when dry) which is considered good protection, and wet rubbing (friction when damp or sweaty) is rated at level 3 or above which is acceptable but more prone to color transfer than dry conditions. Due to the natural properties of the leather and the dyeing process, some fading or color transfer may occur. It is recommended to use with clothing of similar colors.

'-20°C to 40°C (-4°F to 104°F).

Yes, it is compatible.

The material is not waterproof. Use in rainy weather is not recommended.

Unlikely. The Quick-Release Plate is connected to the Buckle via an impact absorbing polyethylene cord, which does not produce any noticeable noise.

A slight gap is intentionally left between the Quick Mount Bead and the Buckle to ensure smooth operation. This does not affect normal use or safety.

The PGYTECH Camera Strap Pro is made from premium-quality genuine leather and is not recommended for direct washing with water. For surface dirt or stains, please refer to the following cleaning methods:
Spot Cleaning:                                                                                                                         - Water/Oil stains: Gently blot the stain with a clean, absorbent cloth to soak up the liquid. Do not rub forcefully.
- Stubborn stains on smooth leather: Use a leather cleaner (neutral pH), apply with a soft cloth, and clean in circular motions. Do not pour the cleaner directly onto the leather.
- Suede stains: Use a suede-specific eraser or a soft brush. Avoid water exposure.
- Ink stains: Test the edge of the stain with a cotton swab dipped in alcohol. If no discoloration occurs, proceed cautiously. (Note: Alcohol may damage certain leathers, use with care.)

The PGYTECH Camera Strap Pro is made from premium-quality genuine leather. Please follow the guidelines below for daily care:
- Do not use wet wipes, soapy water, dishwashing liquids, or other alkaline cleaners.
- Do not apply regular shoe polish or furniture wax, which may damage the surface coating.
- For long-term storage, keep in a dry, well-ventilated area (recommended humidity: 40%RH–60%RH). Use desiccants to prevent mildew.
- Cedar wood blocks or mothballs may be placed near the strap to protect against mold and insects (avoid direct contact with the leather). For mildew spots, gently wipe with a cloth dampened in diluted alcohol (1:1 with water).

Adjustable length: 830–1450mm (32.6-57in); suitable for users with heights ranging from 150-190cm (4.9-6.2ft).

Maximum tested load capacity is up to 90kg (198.4lb) under extreme conditions.

The Underarm Strap can be attached to the front and rear buckles of the main strap. Adjust the length to secure the strap more stably against the body.

The Buckle features a dual-anchor design with separate unlock points on both ends.
The side button locks the strap position; the upper front button releases the buckle.

The PGYTECH patented locking system uses a dual-anchor design between the Quick Release Buckle and the Quick Mount Bead for secure attachment. The buckle is made of high-strength plastic and utilizes a dead-point mechanism to firmly lock the bead in place from any angle. The UHMWPE (ultra-high molecular weight polyethylene) woven cord supports up to 90kg (198.4lb).

The Quick Release Plate features PGYTECH's patented anti-loosening design. Please use the included hex key to securely mount it to your camera.

The Quick Mount Bead Cord is made from UHMWPE using a triple-layer weave (red, yellow, black). When the yellow layer becomes visible, it indicates significant wear. Please replace the Quick Mount Bead Cord immediately to ensure continued safety.

The Quick Release Buckle and Quick Mount Bead System uses a dual-anchor design and must be used with the included Quick Release Plate. Do not connect directly to the camera's strap eyelets.

You can operate the quick release system while wearing gloves; however, thick gloves may reduce ease of operation.

The Camera Strap Pro is crafted from premium cowhide leather and features 56 ventilation holes that enhance airflow and heat dissipation, effectively reducing heat buildup and ensuring long-lasting comfort.

The Camera Strap Pro is recommended for use with mirrorless and DSLR cameras.

The Quick Mount Bead features a smooth, rounded, ball-shaped design that prevents scratching your gear.

We provide a 3-year warranty for manufacturing defects or malfunctions that prevent full or partial use of the product.
However, cosmetic imperfections, scratches, stains, normal wear or wear from misuse, neglect, or intentional damage are not covered. Items not manufactured by PGYTECH, such as fabric components (straps, cords), are also excluded from warranty coverage unless defective upon delivery.

The Camera Strap Pro is optimized for left-shoulder cross-body wear. Right-shoulder single-strap carry is possible for temporary use.

The Underarm Strap extends up to 550mm (21.65in) in length.

The Camera Strap Pro features an asymmetrical design. The widest part at the shoulder measures 60mm (2.36in), helping to distribute pressure and reduce fatigue.

The Quick-Release Buckle is made from plastic material and will not cause scratches with light contact. For storage, it is recommended to keep the camera and strap separate.

The color fastness of the materials in contact with the body can reach level 4 or above for dry rubbing (friction when dry) which is considered good protection, and wet rubbing (friction when damp or sweaty) is rated at level 3 or above which is acceptable but more prone to color transfer than dry conditions. Due to the natural properties of the leather and the dyeing process, some fading or color transfer may occur during use. We recommend pairing it with similar-colored clothing.

-20°C to 40°C (-4°F to 104°F).

Yes, it is compatible.

The material is not waterproof. Use in rainy weather is not recommended.

Unlikely. The Quick-Release Plate is connected to the Buckle via an impact absorbing polyethylene cord, which does not produce any noticeable noise.

A slight gap is intentionally left between the Quick Mount Bead and the Buckle to ensure smooth operation. This does not affect normal use or safety.

Adjustment Range: Vintage/Trendy/Outdoor Style: 820mm–1360mm/32.2-53.5in, suitable for users 150–190cm/4.9-6.2ft in height.
Adjustment Method: Each side has an adjustment buckle for easy length adjustment.

Maximum load capacity: 30kg (66.1lbs). No, it will not break easily.

PGYTECH's patented buckle system uses high-strength plastic and a dead-point mechanism, preventing accidental release at any angle. Combined with multi-layer braided UHMWPE cord, load capacity reaches 30kg (66.1lbs).

The quick-mount bead cord is made of UHMWPE material, featuring a red and yellow dual-layer weaving process from the inside out. When the yellow layer becomes visible, it indicates significant wear. Please replace the quick-mount bead promptly before continued use.

Yes. The Camera Strap Slim series quick-mount bead cord is made of 1.0mm/0.04in fine rope, directly compatible with most camera models such as Fujifilm and Ricoh.

Vintage Style: The strap body is made of genuine leather and microfiber. For minor stains, wipe with fabric cleaner and air dry in a shaded area. Produced with a multi-layer lamination process. Do not soak, machine wash, or expose to direct sunlight while drying.
Trendy Style: The strap body is made of multicolor braided rope. For minor stains, rinse with clean water and air dry in a shaded area. Do not machine wash.
Outdoor Style: The strap body is made of UHMWPE braided rope. For minor stains, rinse with clean water and air dry in a shaded area. Do not machine wash.

Yes, detachment is possible while wearing gloves, though thicker gloves may increase difficulty of operation.

No. The Camera Strap Slim series camera strap emphasizes lightweight carrying and stylish design. The shoulder straps feature an ultra-narrow construction and breathable materials, with ventilation carefully considered in the design process

The Camera Strap Slim is recommended for compact cameras, instant cameras, and smartphones, and is also compatible with lightweight mirrorless cameras.

No. The quick-release mount is made of flexible TPU with a smooth, rounded design, ensuring it will not scratch your gear.

Yes, it can be used as a shoulder strap for bags if the bag has suitable attachment points for the quick-mount bead system.

We provide a 3-year warranty for manufacturing defects or failures that render part or all of the product unusable. Cosmetic flaws, scratches, stains, wear caused by misuse, negligence, or intentional damage, as well as non-factory functional defects in materials we do not manufacture (such as webbing or cords), are not covered.

Vintage Style: strap body width 18mm (0.7 in)
Trendy Style: strap body width 16mm (0.6 in)
Outdoor Style: strap body diameter 8.5mm (0.3 in)

Currently unavailable for separate purchase. For additional units, please contact official customer service.

The SN code is located on the back of the strap's quick-release buckle and on the back of the packaging.

The Camera Strap Slim emphasizes lightweight carrying and stylish design, ideal for compact cameras, instant cameras, smartphones, and other lightweight devices. It also offers a variety of visual styles, currently available in Trendy, Outdoor, and Vintage designs, each with distinctive characteristics.

120mm-200mm

The camera wrist strap air is composed of a double layer of high-strength Dyneema fiber, and has undergone deformation and failure testing up to a maximum load of 35kg without breaking.

The quick connector utilizes a dead point mechanism. There is no risk 
of the camera falling off, regardless of the angle of force applied, as long as the quick bead remains locked. Combined with UHMWPE lanyard, it can stand a load of up to 35KG. 

The lanyard is made of UHMWPE, which shows red, yellow and black for different layers from the inside to the outside. When the yellow color becomes visible, please replace the quick bead with a new one in time.

The material is made of microfiber and may show signs of use over time. Light stains can be wiped off.

For slight surface stains, it is recommended to wipe with water. If the stains are more serious, buying fabric cleaner and wiping clean, in a ventilated place to dry naturally is recommended. Do not wash or machine wash, avoid exposure to high temperatures.

The microfiber material is skin-friendly and breathable. It is less likely to cause discomfort from heat and humidity compared to woven straps.

Yes, but if gloves that are too thick, the operation can be difficult.

The quick bead of the camera wrist strap air is made of 1.5mm diameter Dyneema, which can be adapted to most cameras. If you can't thread the rope directly, you can use the metal clip included in the package to use with the lanyard. 

No, our quick beads are presented in a round shape. 

We provide a three-year warranty service covering product manufacturing defects or faults leading to partial or complete inability to use the product. It should be noted that defects related to product appearance, such as scratches, stains, or wear and tear caused by intentional damage, misuse, or negligence, are not covered under this warranty. Similarly, any damages caused by components not produced by us, such as fabrics, that do not stem from factory functional defects, such as regular wear and tear of materials like straps and ropes, are not eligible for warranty coverage.

Refer to the comparison table for details

320mm (12.6 in).

Maximum load capacity up to 25kg (55.1lbs).

The PGYTECH patented lock system uses high-strength plastic and a dead-point mechanism to firmly secure the quick-mount bead, preventing accidental release at any angle. Combined with multi-layer braided UHMWPE cord, it supports loads up to 25kg (55.1lbs).

The quick-mount bead cord is made of UHMWPE material, featuring a red and yellow dual-color multi-layer braiding from the inside out. When the yellow layer becomes visible, it indicates significant wear. Please replace the quick-mount bead promptly before continued use.

Vintage Style: The strap body is made of genuine leather and microfiber. For minor stains, wipe with fabric cleaner and air dry in a shaded area. Produced with a multi-layer lamination process. Do not soak, machine wash, or expose to direct sunlight while drying.
Trendy Style: The strap body is made of multicolor braided rope. For minor stains, rinse with clean water and air dry in a shaded area. Do not machine wash.
Outdoor Style: The strap body is made of UHMWPE braided rope. For minor stains, rinse with clean water and air dry in a shaded area. Do not machine wash.

No. The Camera Wrist Strap Slim emphasizes lightweight carrying and stylish design. The strap features an ultra-narrow, breathable construction, with ventilation carefully considered during the design process.

Yes, detachment is possible while wearing gloves, though thicker gloves may increase difficulty of operation.

The Camera Wrist Strap Slim is recommended for compact cameras, instant cameras, and smartphones, and is also compatible with lightweight mirrorless cameras.

No. The quick-release mount is made of flexible TPU with a smooth, rounded design, ensuring it will not scratch your gear.

We provide a 3-year warranty for manufacturing defects or failures that render part or all of the product unusable. Cosmetic flaws, scratches, stains, wear caused by misuse, negligence, or intentional damage, as well as non-factory functional defects in materials we do not manufacture (such as webbing or cords), are not covered.

Vintage style: strap body width 18mm (0.7 in)
Trendy style: strap body width 16mm (0.6 in)
Outdoor style: strap body diameter 8.5mm (0.3 in)

Currently unavailable for separate purchase. For additional units, please contact official customer service.

The SN code is located on the back of the strap's quick-release buckle and on the back of the packaging.

The Camera Wrist Strap Slim emphasizes lightweight carrying and stylish design, ideal for compact cameras, instant cameras, smartphones, and other lightweight devices. It also offers a variety of visual styles, currently available in Trendy, Outdoor, and Vintage designs, each with distinctive characteristics.

The main body is constructed using high-strength nylon and aluminum alloy materials. The handle grip is wrapped in soft rubber, providing effective anti-slip capabilities.

Featuring the new CapLock quick-release system, it comes with an action camera adapter and a 1/4" adapter. It can be used to connect action cameras, smartphones, and compact cameras (weighing ≤1kg) for photography. Smartphones require a smartphone clamp for attachment.

It can extend by 29 cm. In handheld mode, the maximum length is 47cm, while in tripod mode, it can reach a height of 41cm. 

Yes, the ball head allows for multi-angle adjustments and thus supports portrait shooting. 

The Extension Pole Tripod is stable enough to meet high-quality standards. There will be no issues of structural looseness.

157g.

180mm*31mm*55mm.

It is made of high-strength plastic nylon,  fiberglass and aluminum alloy, ensuring good sturdiness and reliability.

The package includes an action camera adapter and a 1/4" adapter, allowing it to be compatible with various brands of action cameras and smartphones (A phone clamp is needed).

It can be used within a temperature range of -10°C to 40°C.

300g.

The PGYTECH CapLock Action Camera Handlebar Mount can be securely attached to positions such as bicycle handlebars, electric bicycle handlebars, motorcycle handlebars, rear view mirror poles and under-seat poles. It can grip tubes with a diameter ranging from 8mm to 16mm and 22mm to 35mm.

Our CapLock Action Camera Magnetic Mount has a maximum weight capacity of 300g and is suitable for most action cameras on the market, including DJI Osmo Pocket/Action, Insta360 action cameras, GoPro action cameras, and more.

It features the new CapLock quick-mount system and comes with an action camera adapter and a 1/4" adapter. This mount can connect to action cameras and smartphones for shooting, with the smartphone requiring a phone clamp for use.

The PGYTECH Action Camera Magnetic Mount utilizes a strong magnetic design and can be used in specified sports conditions. When used on a vehicle, the driver should choose flat urban roads, with speed not exceeding 80 km/h. When used on the outside of vehicle, it's recommended to use a safety lanyard to prevent accidents.

The base of the PGYTECH Action Camera Magnetic Mount is made of soft rubber material, and it will not cause any damage to the vehicle's body.

The Action Camera Magnetic Mount is suitable for supporting action cameras and smartphones on the vehicle's body, metal surfaces like car panels or railings, door frames, and other metal surfaces for creative shooting.

The load capacity is 300g. 

The CapLock Action Camera Neck Mount allows you to mount an action camera for a first-person perspective, making it ideal for activities such as cycling, off-roading, fishing, running, and other sports.

The package includes an action camera adapter and a 1/4" adapter, allowing it to be compatible with various action cameras and smartphones.

The PGYTECH CapLock Action Camera Neck Mount features a new CapLock quick-release system design. With the included action camera adapter, you can quickly and securely connect your action camera to the neck mount.

Yes, the PGYTECH CapLock Action Camera Neck Mount comes with a 1/4"adapter. With a smartphone clamp, it can be connected with smartphones.

The surface of the PGYTECH CapLock Action Camera Neck Mount is made of skin-friendly silicone material, providing a comfortable touch. The interior tube is made of stainless steel and aluminum alloy, offering stable support while allowing flexible shaping to provide a comfortable fit.

135g. 

The PGYTECH CapLock Action Camera Neck Mount, when used with the fixing strap, significantly enhances the stability of action camera recording, providing a more stable and comfortable wearing and shooting experience.

Yes, the CapLock quick-release system supports four-way installation, allowing you to quickly switch between landscape and portrait shooting orientations.

It is suitable for users with a neck circumference of up to 40cm.

1 year. 

It can be attached to smooth surfaces like glass, both indoors and outdoors.

It features the new CapLock quick release system and comes with an action camera adapter and a 1/4" adapter. This mount can connect to action cameras and smartphones for shooting, with the smartphone requiring a phone clamp for use.

The CapLock Action Camera Suction Cup Mount is designed to securely hold action cameras, smartphones, small photography lights, microphones, and other equipment on smooth surfaces such as glass, tables, and tiled walls. Dual ball head construction features 360° tilting and rotating capabilities, effortlessly adjusted via a wingnut. With a foldable and compact design, it's portable and convenient to carry. With its action camera adapter and 1/4" adapter, it offers broad compatibility with action cameras and smartphones.

No, it will not detach as long as it is used under required conditions. 

It can hold up to 300g when fixed to a smooth surface.

It can be used during specified motion environments. When used in a vehicle, it should be on flat city roads with a speed not exceeding 80 km/h. When used outside of a vehicle, it is recommended to use a safety lanyard to prevent accidents.

The PGYTECH CapLock Action Camera Suction Cup Mount can be used in environments with temperatures ranging from -10°C to 40°C.

It is suitable for first-person perspective filming and recording in scenarios like fishing, hiking, and crafting.

No, the CapLock Magnetic Smartphone Neck Mount uses a magnetic connection to secure the phone. It is not recommended for use during vigorous activities due to the risk of phone falling.

The vertical magnetic force reaches 30N, which can meet the needs of most phones (not suitable for foldable phones).

Action cameras (with 3-prong mount) and smartphones (excluding foldable phones).

The part in contact with the skin is made of silicone for a soft and skin-friendly feel. The main body uses a stainless steel tube, which can be flexibly shaped during wearing to avoid discomfort; other stressed parts are made of high-strength plastic and aluminum alloy for safety and reliability.

300g

One year.

No, it does not have anti-shake functionality.

The package includes a magnetic ring for adapter use. Please note the following:
1. The magnetic ring is suitable for smooth, clean, flat phone case surfaces. Not suitable for matte glass, silicone, leather, wood, or fabric phone cases.
2. Not recommended for use directly with bare phones due to the risk of detachment. It is recommended to use a MagSafe phone case.
3. Before attaching the magnetic ring, clean the surface. After attaching, let it sit for over 24 hours before use.

Not recommended. The product is primarily designed for first-person perspective filming.

Please read the instruction manual carefully to quickly learn the functions. 

When using the Mantis mode, please note:
1. The hanging surface thickness should be less than 90mm.
2. When one leg is hanging, the other two legs should also be supported. 
3. Avoid hanging it on moving vehicles, boats, or other mobile objects.

The stability of the MantisPod Power is achieved through the principle of stable support of three points in space. Under right using conditions, it can stably support devices weighing up to 1KG for shooting. 

Action cameras: GoPro 9/10/11/12/13; 
Smartphones: Android, Apple (TYPE-C interface), and HarmonyOS.

Action cameras:  Insta360 Ace Pro/Ace/Go 3/X3/ONE RS(Twin/4K Edition)
ONE RS 1-Inch 360 Edition/ONE X2/0NE R;
Smartphones: Android, Apple (TYPE-C interface), and Harmony OS.

Up to 1KG.

The MantisPod Power emerges as a versatile desktop tripod imbued with multiple operational modes, including handheld shooting, desktop tripod support, Mantis mode shooting, vertical shooting, and briefcase mode. It caters comprehensively to diverse shooting environments such as home, outdoor, venue, and office settings. The Mantis mode introduces an innovative hook design, facilitating attachment to varied surfaces like trees, glass, and doors. Additionally, equipped with a built-in 5000mAh lithium battery, it ensures uninterrupted shooting by enabling simultaneous charging. The inclusion of a remote control module empowers users with functionalities like remote photo capture, video recording, and zoom control.

One-year warranty. 

284g (excluding accessories).

The compact dimensions measure 225mm*50mm*60mm.

The MantisPod Power seamlessly integrates the quick release system, employing a quick release plate for camera attachment, thus facilitating rapid assembly and disassembly with the tripod.

The maximum support height is 180mm.

While the MantisPod Power offers stable device support, the tripod itself does not incorporate stabilization features.

Yes, the leg bottom uses flexible, non-slip material, ensuring reliable grip and stability.

The main body of the MantisPod Power is meticulously crafted from high-strength nylon plastic infused with glass fiber, complemented by aluminum alloy components, thereby striking an optimal balance between strength and lightness.

The remote control facliitates seamless connectivity with action camera, enabling remote execution of functions such as photo capture/recording, mode swithcing, power management and screen locking. It enables remote control of photo capture and video recording functionalities when connected to smartphones.  Note: Please check the compatibility of the two editions.

Mirrorless cameras/compact cameras featuring a Type-C interface can leverage charging capabilities. However, remote control functionality is not extended to the camera. For users requiring remote control capabilities, the Mantis RC M1 is available for separate purchase.

The Type-C male port supports 5V 2.0A discharge, while the Type-C female port supports 5V 2.4A charging.

The MantisPod Power does not feature waterproof capabilities and is not recommended for underwater usage.

It features a built-in 5000mAh lithium battery, equivalent to 2.5 units of action camera battery capacity.  It supports 5V2.4A input and 5V2.0A output, allowing simultaneous charging and shooting of action cameras.

The PGYTECH CapLock MantisPod Z is a versatile desktop tripod designed for action camera users. It combines grip, extension, tripod, mantis, and briefcase mode functions into one device. The innovative extendable arm provides a broader shooting perspective.

It's compatible with action cameras, smartphones, and compact cameras (≤1kg) (Note: Load capacity in extension mode is up to 500g).

Note: 
1.Mantis Mode can only be applied when:
Ensure that the surface you hang it on is no more than 90mm thick.
Ensure that the other two legs are supported to form a triangular structure.
Avoid hanging it on moving vehicles, yachts, or other moving objects.

The Mantis mode utilizes three-point support for stability during shooting. When the using conditions are met, it can stably support equipment weighing up to 1kg.

Three years.

205mm*70mm*60mm.

460mm.

270g.

The PGYTECH CapLock MantisPod Z features the innovative CapLock quick-release system . It comes with an action camera adapter and a 1/4 adapter, allowing for quick and secure connection to action cameras.

No.

Yes. 

81g(net weight).

90mm*40mm*40mm.

Aluminum alloy, PA (polyamide), and rubber.

The CapLock Rearview Mirror Mount comes with standard tube sleeves of different sizes (6mm/8mm/10mm/12mm/14mm) that can be chosen according to the specific needs.

The CapLock Rearview Mirror Mount is compatible with various action cameras, smartphones, and other devices weighing up to 350g.

The product can be directly connected to the CapLock Rearview Mirror Mount via a 1/4" interface. It also comes with a 1/4 quick-release plate and an action camera adapter, allowing users to choose for more efficient device assembly and disassembly.

It is prohibited to connect an extension rod for use, as there is a risk of breakage.

When the device is mounted directly on the CapLock Rearview Mirror Mount, road cycling speed should not exceed 80km/h, and off-road cycling speed should not exceed 40km/h.

The CapLock Rearview Mirror Mount features a single-wingnut locking design, allowing easy operation and supporting dual-axis adjustment. The upper part can rotate 360° and tilt 180°. The ball head also allows for a 360-degree rotation with a tilt of 35 degrees, meeting various shooting needs in different scenes and angles.

It is suitable for temperatures ranging from -10°C to 40°C.

This product comes with a one-year warranty service.

Our Three-arm Suction Mount has a maximum weight capacity of 300g and is compatible with most action cameras, smartphones, and compact cameras available on the market.

The mount features the innovative CapLock quick-release system. It comes with an action camera adapter and a 1/4" adapter, allowing you to connect action cameras and smartphones. (Smartphones require a smartphone clamp for attachment.)

Can only be used on a smooth, flat, non-porous surface； 
Not applicable surface:
（1. Coating surface; 2. Natural marble surface; 3. Old tile surface; 4. Breathable wallpaper;   5. Diatom mud wall; 6.Unpainted wood surface; 7. Frosted glass surface; 8. Other rough or breathable material surface;）
3. When using this product on motorcycles or the outside of vehicles, please choose flat roads and make sure the applied surface is smooth and flat.  And the moving speed should be strictly controlled below 80km/h. 
4. It is recommended to use a safety lanyard to avoid accidents. The other end can be securely fastened at a reliable location.

It is not suitable for use in activities such as surfing, skiing, or other high-impact sports. This product is only suitable for non-impact activities.
Working temperature: -10°C to +40°C.
When not in use, do not press the button, otherwise the suction force may be affected.
Note: Maximum weight capacity is 300g.

No, it does not offer video stabilization functionality.

Compared to the CapLock Action Camera Suction Mount, the CapLock Three-arm Suction Mount offers better stability:
1. The Three-arm Suction Mount is especially suitable for mounting on the external side of vehicles.
2. The Three-arm Suction Mount is suitable for compact and mirrorless cameras.

The CFE-A/SD Version can store CFexpress Type A card*3，SD card*3，Micro SD card*4，Nano SIM card*2，eject pin*1. And the CFE-B/SD Version can store CFexpress Type B card*2， SD card*3，Micro SD card*4，Nano SIM card*2，eject pin*1. 

USB C supports up to USB3.2 Gen2 10Gbps transfer rate and compatible with CFA/CFB memory card, with a theoretical transfer rate of up to 1000MB/S. The card reader also supports SD4.0 SD/Micro SD card (via card adapter), with a theoretical transfer rate of up to 312MB/S.

It has a large storage space and an ultra-high transfer speed. It also has IP54 protection.

130*75*27mm（with silicone case included).
125*60*22mm（without silicone case）
Weight：212g

• Devices: Cameras, smartphones, drones, action cameras. 
• Memory Cards: 
Compatible with CFexpress Type A card/CFexpress Type-B cards
Compatible with UHS-Ⅱ，SD 4.0:
UHS-Ⅱ, SDXC, SDHC, SD Cards
UHS-Ⅰ, SDXC, SDHC, SD Cards
UHS-Ⅱ, Micro SDXC, Micro SDHC, MicroSD Cards
UHS-Ⅰ, Micro SDXC, Micro SDHC, MicroSD Cards
• Systems：
Windows 7 and above, Mac OS 10.6 and above, Linux,  Android, iPad OS
Note: 
Data transfer only applies to Type-C port phones and tablets that support OTG; To connect with a desktop computer, a  Type-C to USB-A adapter is required.

PGYTECH card reader case is designed with a standard Type-C port and can be used with a wide range of products such as mobile phones and tablets.
It doesn't support Lightning-port iPhones and when used with desktop computers, a Type-C To USB-A adapter is required.

 It has one CFexpress Type A card/CFexpress Type B slot, one SD slot and supports reading of CFexpress Type A/Type B, SD and Micro SD memory cards.
Note: CFexpress Type A card/CFexpress Type B card and SD/Micro SD cards cannot be read simultaneously. The product prioritizes CFexpress Type A card/CFexpress Type B card when both cards are inserted. After CFexpress data transfer, the SD card becomes accessible.
 

PGYTECH CreateMate Card Reader Case is plug-and-play, requiring no additional power supply in most cases. If there is a disconnection issue during the transfer process (the card can be read when connected, but the connection intermittently drops and reconnects), it may be due to insufficient power. In such cases, you can provide separate power through the external power interface of the card reader case to ensure stable operation.

PGYTECH card reader case features IP54 protection and the surface can resist splashes. 

The card reader case uses Type-C port and can not support Lightening-port iPhones.

This card reader case uses Type-C port, so: 
If your iPad uses Type-C port, you can connect them directly;
If your iPad uses Lightning port, it is not supported. 

Yes.  But a Type-C to USB-A adapter is required as PGYTECH CreateMate Card Reader Case uses the Type-C port.

No, it does not support XQD cards, but it can read CFexpress Type A card/CFexpress Type B, SD and Micro SD cards. 

This is designed for the Mavic mini size. Other models of remote control cannot be used.

The strap is in the triangular bag at the front of the backpack. The belt is inside the backpack.

Size: 138mm * 48.5mm * 25mm Weight: 16g

Yes, the original carrying case can also hold it.

ABS.

This is designed for the Mavic mini size. Other models of remote control cannot be used.

• Devices: Cameras, smartphones, drones, action cameras. 
• Memory Cards: 
Compatible with UHS-Ⅱ，SD 4.0:
UHS-Ⅱ，SDXC,SDHC,SD CARDS
UHS-Ⅰ，SDXC,SDHC,SD CARDS
UHS-Ⅱ，micro SDXC, micro SDHC, microSD CARDS
UHS-Ⅰ，micro SDXC, micro SDHC, microSD CARDS
• Systems：
Windows 7 and above, Mac OS 10 and above, Linux,  Android, iPad OS.  
Note: 
Data transfer only applies to Type-C port phones and tablets that support OTG; To connect with a desktop computer, a  Type-C to USB-A adapter is required. 

The PGYTECH flash card case is designed with a standard Type-C port and can be used with a wide range of products such as mobile phones and tablets.
It doesn't support Lightning-port iPhones and when used with desktop computers, a Type-C To USB-A adapter is required.

 It has one SD slot, one TF slot and supports dual-slot reading. 

No, it supports plug-and-play and does not require charging. 

PGYTECH CreateMate Card Reader Case features IP54 protection and the surface can resist splashes. 

The PGYTECH Flash Card Case uses Type-C port and can not support Lightening-port iPhones.

This card reader case uses Type-C port, so 
If your iPad uses Type-C port, you can connect them directly;
If your iPad uses Lightning port, it is not supported. 

Yes.  But a Type-C to USB-A adapter is required as PGYTECH CreateMate High-speed Card Reader Case uses the Type-C port.

It can store SD card *4，TF card*4，Nano SIM card*2，eject pin*1. 

The transmission speed is up to 312MB/s, based on test. 

It has a large storage space and an ultra-high transfer speed of 312 MB/s. It also has IP54 protection.

115*60*25mm（with silicone case included).

It can hold 2 SD and 4 Micro SD cards.

It supports theoretical data transfer speeds up to 312MB/s.

1. It seamlessly merges ultra-high-speed data transfer with organized memory card storage in one device.
2. The palm-sized and lightweight design lets it easily fit in your pocket, backpack, or camera bag.
3. It's equipped with a USB 3.1 high-speed chip that delivers data transfer speeds up to 312MB/s.

2.36*2.48*0.74in (excluding cable)

Compatible Device Types: Cameras, Drones, Action Cameras, Smartphones.

Compatible Memory Card Types:
Supports UHS-II and SD 4.0 standards, including:
• UHS-II: SDXC, SDHC, SD Cards
• UHS-I: SDXC, SDHC, SD Cards
• UHS-II: Micro SDXC, Micro SDHC, MicroSD Cards
• UHS-I: Micro SDXC, Micro SDHC, MicroSD Cards

Compatible Operating Systems:
Windows 7 or later, macOS 10 or later, Linux, Android, iPadOS

* The instant transfer function is supported only on OTG-enabled Type-C smartphones and tablets. When connecting to desktop or laptop computers that are not OTG-enabled, a separate Type-C to USB-A adapter is required. It is not currently compatible with Apple iPhones equipped with a Lightning port.

The Mini Card Reader Case features a standard USB Type-C port, making it compatible with a wide range of Type-C devices including phones, tablets, and computers. Connection to desktop or laptop computers that are not OTG-enabled requires a separate Type-C to USB-A adapter. It is not currently compatible with Apple iPhones equipped with a Lightning port.

It is equipped with one SD and one Micro SD card slot, and supports simultaneous data reading from both cards.

No charging is needed. It's plug and play.

No, the Mini Card Reader Case is not waterproof.

No, not all iPhone models at this time. The Mini Card Reader Case uses a Type-C interface and is not currently compatible with iPhones that have a Lightning port.

No, not all iPad models at this time. The Mini Card Reader Case features a USB Type-C interface and is not currently compatible with iPads that have a Lightning port.

Yes. The Mini Card Reader Case uses a Type-C interface. Connection to desktop or laptop computers that are not OTG-enabled requires a separate Type-C to USB-A adapter for data transfer. 

No. The Mini Card Reader Case does not support XQD cards. It only supports reading SD and Micro SD cards.

No. The Mini Card Reader Case features an integrated design with a non-removable data cable.

Yes.

Cable length:  90mm/3.5in (excluding connectors).

No driver is required. It's plug and play.

Yes.

Yes, you can use an SD card adapter; however, the Mini Card Reader Case features built-in slots for both SD and Micro SD cards, so using the adapter is not necessary.

The Mini Card Reader Case is a compact card reader built to withstand drops from up to 1-meter/3.3 feet.

It comes with a 1-year manufacturer's warranty.

The Ivory White version of the Mini Card Reader Case is made with a TPU surface. There is a risk of color transfer when it comes into contact with denim, so we recommend avoiding direct contact.

If color transfer occurs, it is recommended to clean the surface with alcohol.

It comes with a 1-year manufacturer's warranty.

1. The Card Case features a modular design and includes multiple card slot modules of various sizes, allowing users to customize the layout based on the number and type of memory cards for highly efficient space utilization.
2. It is rated IP54 for dust and splash resistance.
3. The shell incorporates a triple-layer protective structure of silicone, metal, and plastic to effectively safeguard your memory cards.

It is compatible with Micro SD, SD, CFA, CFB, XQD, and Nano SIM cards.

It can store up to 6 CFA cards, 16 Micro SD cards, 6 SD cards, 6 CFB/XQD cards, and 1 Nano SIM card (capacity varies depending on layout; not all can be stored simultaneously).

The PGYTECH Card Case is built to withstand drops from up to 1-meter/3.3 feet.

Rated IP54 for protection against dust and water splashes.

No, it does not have a built-in anti-loss tracking feature, but it can be paired with an Apple AirTag or similar tracker for location tracking.

The modules allow you to flexibly adjust and freely configure the storage layout based on the number and type of memory cards, maximizing space utilization.

Slide open the tray cover to remove and replace the card slot module as needed.

Yes. Please contact our official support team to purchase them separately.

No. This card case provides storage for memory cards. It does not have a data reading/transfer function.

This card case provides storage for memory cards but does not have a data transfer function.

No, it’s incompatible.

Our design is based on the dimensions of the original lens of the drone and installing the filter won’t affect the calibration and functionality of the gimbal.

Our filter is processed with a double-sided, multi-layer coating, which makes it waterproof, oil-proof, and scratch-resistant. There is also a cleaning cloth in the box, which can be used to wipe the filter before storage.

Yes, it does.

Our filter has been designed to have the same dimensions as the drone’s original lens, so it’s necessary to remove the original lens before installation.

The UV filter blocks out blue light, which prevents images from looking bluish or whitish. It also protects the lens. 

The CPL filter eliminates glares from reflective surfaces, such as water, snow or even glass windows when flying outdoors. It increases color saturation and image clarity to create more expressive and vivid photos.

The ND set (ND 8 16 32 64) ensures you always shoot with the correct exposure because it avoids overexposure by limiting the amount of light that enters the lens.

The ND-PL set (ND-PL 8 16 32 64) ensures you always shoot with the correct exposure because it avoids overexposure by limiting the amount of light that enters the lens. It also prevents unwanted reflections.  

2-5 Stop: ND4, ND8, ND16, ND32
6-9  Stop: ND64, ND128, ND256, ND512
 

The VND filter is small, lightweight, and easy to disassemble. One VND filter combines the effects of four ND filters with the added comfort of only having to rotate the VND filter to adjust the exposure. No need to waste time swapping filters.

UV/ND:29mm*23.5mm*4.1mm；CPL:29mm*23.6*5.1mm；   VND:29mm*24.9mm*5.6mm

Our design is based on the dimensions of the original lens of the drone and installing the filter won’t affect the calibration and functionality of the gimbal.

Our filter is processed with a double-sided, multi-layer coating, which makes it waterproof, oil-proof, and scratch-resistant. There is also a cleaning cloth in the box, which can be used to wipe the filter before storage.

We ship to most countries worldwide. Here is an extensive list:

Austria, Belgium, Bulgaria, Brunei, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Indonesia, Italy, Japan, Latvia, Lithuania, Luxembourg, Malta, Malaysia, Mexico, Netherlands, Philippines, South Korea, Netherlands, Norway, North Korea, Philippines, Poland, Portugal, Romania, Singapore, Slovakia, Slovenia, Spain, Sweden, Switzerland, Thailand, United Kingdom, United States.Russia, Ukraine

PGYTECH DJI FPV ND Filters are lightweight so won't affect your drone's calibration or overall performance.

Our filters are processed with a double-sided, multi-layered coating, which makes it water, oil, and scratch resistant. We also provide a cleaning cloth inside the box to use on the filter before storage.

No, they don't. Please remove the Filters before you mount the original gimbal protector.

The PGYTECH DJI FPV ND Filters Set (4 8 16) combats overexposure by preventing light from entering the lens to ensure the correct exposure for drone footage.

No, it won't. The silica gel placed inside the frame ensures that the installation process doesn't damage the original lens.

The silica gel placed inside our filters snugly fits the lens of your drone. They won't fall off accidentally.

The size and structure of the PGYTECH DJI FPV ND Filters have been exclusively designed for DJI FPV. It's not compatible with other products.

PGYTECH DJI FPV ND Filters have been designed to be mounted and dismounted easily. Just put the filter where you'd normally put the lens and that's it.

PGYTECH's FPV Safety Case can be used to store 24 A drones, chargers, charging hubs, batteries, a pair of propellers, 3 batteries (included one in your drone), remote controller / goggles and their accompanying accessories.

Product size: 41.0 x 33.0 x 16.5 cm

Weight (net): 2.7KG

It's the EVA material that gives off an odor after the molding process. It dissipates after you've used the case a couple of times.

The case is manufactured by injecting plastics from a complete mold，which makes it very impact proof. It's got an IP67 rating which means it's waterproof, impact proof, shock proof and corrosion resistant. It performs well and protects during high and low temperatures.

Yes, PGYTECH's FPV Safety Case has been designed with enough space for your control with the control stick protecter mounted.

A1: The carrying case can accommodate your Mavic 3, remote controller or smart controller, 3 intelligent flight batteries, battery charging hub, AC power adapter, filter, cable.

A2: Product size: 320mm*246mm*130mm
Product net weight: 630g

A3: The maximum load of this case is 3KG. It is a perfect fit to storage your Mavic 3 and its accessories 

A4: The EVA material has a noticeable smell that is the result of the molding process. It naturally dissipates after a period of use.

A5: This case uses the water-resistant material and the water-resistant zipper, which function as IP34 Water resistant. The case is able to keep out dust and short drizzles.

A6: The custom-molded case is made from a thickened EVA lining which protects your drone and accessories from damage caused by shocks.

A7: Yes, the carrying case has enough space inside to storage your Mavic 3 and its protective cover.

A: Our design is based on the dimensions of the original lens of the drone and installing the filter won’t affect the calibration and functionality of the gimbal.

A: Our filter is processed with a double-sided, multi-layer coating, which makes it waterproof, oil-proof, and scratch-resistant. There is also a cleaning cloth in the box, which can be used to wipe the filter before storage.

A: Our filter is processed with a double-sided, multi-layer coating, which makes it waterproof, oil-proof, and scratch-resistant. There is also a cleaning cloth in the box, which can be used to wipe the filter before storage.

A: Our filter has been designed to have the same dimensions as the drone’s original lens, so it’s necessary to remove the original lens before installation.

A: The UV filter blocks out blue light, which prevents images from looking bluish or whitish. It also protects the lens.

The CPL filter eliminates glares from reflective surfaces, such as water, snow or even glass windows when flying outdoors. It increases color saturation and image clarity to create more expressive and vivid photos.

The ND-PL set (ND-PL 8 16 32 64) ensures you always shoot with the correct exposure because it avoids overexposure by limiting the amount of light that enters the lens. It also prevents unwanted reflections.  
 

A: 2-5 Stop: ND4, ND8, ND16, ND32
6-9 Stop: ND64, ND128, ND256, ND512
 

A: The VND filter is small, lightweight, and easy to disassemble. One VND filter combines the effects of four ND filters with the added comfort of only having to rotate the VND filter to adjust the exposure. No need to waste time swapping filters.

A: UV:34.5mm*34.1mm*3.6mm；CPL:φ37.24mm*4.9mm；VND:φ39.2mm*5.9mm 

A1: The case comfortably fits the following accessories: Mavic 3 remote controller or smart controller, 5 intelligent flight batteries, AC power adapter, battery charging hub, cable, battery charger, filter, and a pair of spare propellers. The designed compartment can store your cable or other small accessories.

A: Yes, the safety carrying case has enough space inside to storage your Mavic 3 and its protective cover.

A3: Product size: 410 x 330 x 165 mm
Product net weight: 2.69kg

A4: The EVA material has a noticeable smell that is the result of the molding process. It naturally dissipates after a period of use.

A5:The Mavic 3 safety carrying case is air-tight, IP67 waterproof and tamper-resistant. When sealed properly the carrying case remains completely water tight up to 1 meter underwater. It is also impact, pressure, and scratch-resistant while also able to withstand high temperatures. Equipped with a pressure balance valve, it prevents air pressure differences inside and outside the box.

It can store the whole set of Ronin 4D gear，including Ronin 4D main body, gimbal camera, high-bright main monitor, top handle, left/right hand grip, 3 TB50 intelligent batteries，power adapter, 2-3 lenses. The front pocket stores small accessories like card reader, memory card and data cable. 

Yes, as long as you don't carry anything prohibited.  

Yes, to enhance its durability, this backpack uses splash-proof YKK zippers.

No. 

The waist strap is detachable, please use U-shape buckle to connect with the attachment points. (See tutorial video for detailed guidance) 

The unibody back panel is designed with ventilation ridge to reduce unwanted perspiration.

A fully adjustable carry system with chest, waist, shoulder and stabilizer straps together provides ease of movement on the go. 

Ronin 4D backpack uses PU coating and splash-proof YKK zipper, which can effectively repel water. (Please use a  rain cover for inclement weather) 

The backpack is not washable, if there are stains and dust, please use a wet towel to wipe it.

 Our fabric is strictly tested to meet intense use, and the bottom part touching the ground is made of specially-processed wear-resistant material.

We provide a limited lifetime warranty. Please visit our website for more detailed information. 

Please register via WeChat public account/official website using the SN code. 

No, you need to purchase it separately. 

Yes, the elastic pocket can store iPhone14 Pro Max.

No. 

Quick release plate is suggested to be installed to the fourth 1/4" hole (near 3/8" hole). 

The set includes a magenta filter, a red filter and a light red snorkeling filter.

It can help photographers effectively absorb red light when shooting underwater, improving the color contrast and expressiveness of the picture.

Yes.

Compatible with circular filters up to 10 cm (4 inches) in diameter and square filters measuring up to 10 cm x 10 cm (4 inches x 4 inches).

The filter organizer weighs 205g (0.45 lbs), making it lightweight and easy to carry.

Yes, it features a top handle that allows you to hang it on a backpack or tripod for convenient access.

The interior is lined with a soft microfiber material, similar to that used for cleaning eyeglasses, effectively protecting your filters from scratches.

Constructed with an EVA (Ethylene Vinyl Acetate) shell, the organizer is lightweight, impact-resistant, and offers excellent protection. The internal dividers are padded with thick protective foam, providing multiple layers of defense for your filters.

In addition to being lightweight and protective, this organizer features color-coded tabs, making it easier to organize and quickly access your filters.

External dimensions: 148mm x 134mm x 77mm (5.8 inches x 5.3 inches x 3 inches).

The fabric is water-resistant and easy to clean; however, the entire organizer is designed to be splash-proof, not fully waterproof.

Yes, it is equipped with YKK splash-resistant zippers, offering enhanced protection against moisture.

Washing is not recommended. The filter organizer is constructed from multiple layers of fabric that maintain its shape; washing may cause deformation.

We offer a limited lifetime warranty. If you encounter any quality issues, please feel free to contact us at any time.

3.6kg (excluding accessories such as dividers)

Outer dimensions:
540mmX360mmX250mm(without wheels)
590mmX360mmX250mm(with wheels)

Inner diameter dimensions:
520mmX350mmX150mm

The front compartment can be expanded by 10L

It has been tested and is ready for boarding on most airlines in its non-expanded state. In special cases, the wheelset can be disassembled and boarded as a backpack.
*Subject to actual airline requirements.

It can store up to two DSLR/SLR cameras and nine lenses, 200-600, and up to 400 fixed lenses.
Holds DJI series drones, Z9, etc.

No need. It comes with its own protection and dividers for direct storage of equipment

All four wheels are removable. The wheels can be removed by flicking the knob next to the wheels.

The wheels are removable for backpacking. When the wheels are not removed, you can pull out the wheel cover from the back waist pad and put the wheels on to avoid soiling your clothes.

The wheel body is made of infusion process for longer service life.

There are three adjustable heights, 900 mm/975 mm/1050 mm.

Stable and smooth pulling is ensured by four designs:
1.One-piece molded structure at the bottom to ensure the wheelset is in a horizontal position
2.Double rows of wheels for a more stable stand
3.Wide handle for better control
4.Built-in bearings for a smoother sliding

Yes, and can be quickly disassembled for individual use. It is used to organize batteries and digital accessories for quick security checks.

Yes.

The tripod can be stored on the side or strapped to the top.

Yes, it can store up to a 16” laptop or tablet.

It can be stored in the front expansion compartment or mounted on the side.

Yes.

The main compartment zipper has a locking hole structure and can be used with a luggage lock.

Located at the bottom of the main compartment where the product is labeled.

Washing is not recommended, the product is made of multi-layer fabric shaping and will be deformed after washing.

We provide limited lifetime warranty service, if you encounter product quality problems can contact us at any time.

Our gloves are made with Y-WARM insulation material and are recommended for direct contact with objects at temperatures up to 150°C.

The perforated design is for better breathability, and your palm will not directly contact the light surface, so it will not cause burns.

The gloves come with a 3-year warranty, provided there is no human-caused damage.

The working environment for lighting technicians can be quite sweltering. The mesh material ensures better comfort and breathability.

Yes, the heat-resistant gloves can be washed. Clean them with warm water and let them air dry in a well-ventilated area. Avoid direct sunlight, dry cleaning, or spin drying .

The PGYTECH Insta360 X4 Air Camera Cage is specifically designed for the Insta360 X4 Air action camera, providing both protection and expansion capabilities. Its rugged aluminum alloy construction and rubber cushioning pads ensure maximum protection while keeping key camera areas - battery compartment, power button, and control buttons - unobstructed for seamless operation. An additional 1/4"-20 threaded mount accommodates horizontal shooting in high-intensity scenarios like cycling or surfing. A cold shoe mount and lanyard hole make it easy to attach accessories such as fill lights, microphones, and wrist straps. And the bottom of the cage retains the 1/4"-20 threaded mount and Insta360 quick-release mount. A silicone lens cover is included to protect the lens when it's not in use.

No. The cage has dedicated cutouts for the camera's microphone and sound pickup areas, ensuring audio recording quality will not be affected.

No. The cage has a cutout on the side, allowing for convenient charging without cage removal.

No, it does not interfere with filter installation.

No. A side cutout allows for quick and easy battery and memory card replacement without removing the cage.

Yes.

The two-part cage is constructed of rugged aluminum alloy and has built-in rubber cushioning pads. The lens cover is made of silicone.

Yes.

It is a protection device designed for the Insta360 X4 action camera. The main body is made of metal, which can effectively protect the camera body. There is a a 1/4” threaded interface and a cold shoe mount on each side of the main body of the cage, which are used to expand fill lights, microphones and other products, and can support the use of the camera in horizontal shooting mode. The bottom of the cage has  an universal action camera interface and a 1/4” threaded interface, which is used for external brackets and other products.The universal action camera interface has a magnetic suction function and can be fixed on the cage in normal storage without shaking.

The silicone lens cap is used to protect the panoramic lens when not in use, and is compatible with A-grade and S-grade lens guards.

61.4g

No, it has reserved openings for the action camera microphone and sound hole, which will not affect the sound effects. The camera cage is tightly fixed to the camera body and will not produce any abnormal noise.

No, there is an opening on the side so that it can be charged normally when using the camera cage.

It won't affect.

Yes, it is required.

The camera cage is made of aluminum alloy and can be used in water.

This cage is an accessory designed dedicated for the Insta360 X5 action camera. It offers both protection and expansion capabilities. Featuring two cold shoe mounts on both sides and one 1/4" screw mount, it allows for attachment of tripods, lights, and microphones. The bottom includes a 1/4" mount and Insta360 quick-release interface. Key camera areas like the battery compartment, power button, and control buttons are left unobstructed for seamless operation. A silicone lens cover is included to protect the lens when not in use.

No. The cage includes dedicated cutouts for the camera's microphones and sound holes, ensuring audio quality is not affected.

No. The cage has a cutout on the side, allowing for convenient charging without cage removal.

No, it does not interfere with filter installation.

No. A side cutout allows for quick and easy battery and memory card replacement without removing the cage.

Yes.

The cage body features one-piece design and is made of durable aluminum alloy. The lens cover is made of silicone.

The case is made from premium MASTROTTO genuine leather; aluminum alloy

X-T5 leather camera case：60g
X100VI leather camera case：80g

Fujifilm X-T5, X100VI

X-T5 leather camera case: 130*44*61mm
X100VI leather camera case: 104*49*62mm

The case features a contoured design that precisely matches the camera's shape for a snug fit that maintains the camera's grip and handling. For the X-M5 and X100VI models, an enhanced, integrated grip is added for improved comfort compared to the bare camera.

Yes. The base includes integrated strap lugs for easy attachment of a camera shoulder strap, enabling a secure downward-lens carrying position that provides added protection for your lens.

The main body of the case is crafted from premium imported MASTROTTO genuine leather. If it becomes soiled after prolonged use, gently wipe it with a soft, damp cloth.

The case bottom features a dedicated, built-in 1/4"-20 threaded mount that is compatible with both quick-release plates and tripods.

No.

Yes. The case features a contoured design that ensures a seamless fit with the camera body. In addition, it utilizes PGYTECH's patented anti-loosening screw design to lock the case and camera securely together, providing a durable, reliable connection that resists coming loose over time.

The interior of the case is lined with Toray Ultra-fine microfiber from Japan, a notably soft material that protects your camera by preventing any wear to the body.

No. The case is designed with strategically placed cutouts that avoid contact with the camera's key heat-generating electronic components. This design significantly minimizes any impact on heat dissipation.

No. The case strategically incorporates clearance cutouts at all movable function points on the camera. This design ensures the flip screen and other operations remain fully functional even when the case is attached.

No. The case features precision-engineered clearance to ensure it does not obstruct the battery compartment, allowing fast, easy battery access and changes while the case is attached.

Yes, but in a positive, pleasing way. This case is crafted from genuine leather. Over time and with use, leather naturally develops a unique patina and may have slight shape changes - this is part of the leather's character. To help it maintain its optimal form, we recommend avoiding excessive pressure or crushing during everyday use and during storage.

No. The interior lining in contact with the camera body is made of Japanese Toray Ultra-fine microfiber, which meets the Grade 4 color fastness standard for both wet and dry rubbing, effectively preventing color transfer.

This product comes with a one-year warranty.

Yes, it features a Fidlock magnetic buckle, allowing for easy one-handed operation. 
Note: After closing, gently press the lid to ensure the magnetic buckle is fully locked.

Yes, the back is equipped with a hook-and-loop structure, allowing it to be easily attached to photography straps or the MOLLE webbing of backpack straps.

It utilizes a multi-layer cushioning structure, with an integrated inner lining that effectively embraces the lens, providing excellent shock absorption.

It does not include a shoulder strap but has attachment points, allowing you to add your own strap.

Size M:
Weight: 0.19 kg (0.42 lbs)
External Dimensions: 208 mm × 143 mm × 137 mm (8.19 in × 5.63 in × 5.39 in)
Internal Dimensions: Diameter 105 mm × Height 160 mm (4.13 in × 6.30 in)

Size L:
Weight: 0.26 kg (0.57 lbs)
External Dimensions: 250 mm × 156 mm × 152 mm (9.84 in × 6.14 in × 5.98 in)
Internal Dimensions: Diameter 120 mm × Height 210 mm (4.72 in × 8.27 in)

Washing is not recommended. The product is made of multiple layers of fabric that are shaped together; washing may cause deformation.

We offer a limited lifetime warranty. If you encounter any quality issues, feel free to contact us at any time.